Lawn Mowers

We are authorised dealers for: Atco, Bosch, Briggs & Stratton, Flymo, Hayter, Mountfield, Qualcast, Viking.

In order to suit most needs we stock a wide range of quality Lawn Mowers and can provide you with advice, genuine spares and servicing.

These Machines come in all shapes and sizes:

• Non Powered Mowers are ideal for smaller Lawns and difficult to reach places.
• Mains Electical Mowers tend to be quieter, easier to maintain and suit smaller Lawns.
• Petrol Mowers allow greater freedom and tend to be more powerful, some are powered drive and others have electric starting.
• Hover Lawn mowers for smaller Lawns, or awkward to reach places even slopes.
• Cylinder mowers for extra fine cut, and can be more adept at cutting along Lawn Edges.
• Roller versions give the lawn a striped effect.
• Ride-on Mowers are best suited for larger Lawns, saving much time and effort (please see Ride-on Mowers section for more detail).

As a guide a smaller Lawn is about 5 to 10m across, a medium Lawn is 10 to 15m whilst a larger Lawn is more than 15m across.

 

 

 

 

 

 

 

 

 

 

Lawn Care Guide

Please note that this is only a guide, and conditions of the Weather and the Lawn itself should be taken into account.

 

January 

There is very little work to do this month apart from brushing away leaves.

Keep off the grass if frozen or waterlogged. 

February 

Rake the grass thoroughly.

Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. 

March 

The yearly lawn work programme really starts this month.

As soon as the ground conditions are suitable, the first cut can be made.

The first cut should merely “top” the grass as close cutting at this stage could result in severe yellowing or browning.

Two cuts are generally sufficient this month. 

April 

Mow often enough to stop grass growing away.

Dig out patches of coarse grass or resistant weed.

Re-seed bare patches. 

May 

Keep mowing increasing the frequency as required.

Treat with selective weed killers or combined weed/feed preparations if you did not feed the lawn in April. 

June 

Summer mowing should now be under way.

It should be necessary to mow the lawn twice a week.

Raking before mowing is important this month as the combined action keeps runners of clover under control.

Water the grass if necessary, and remember to soak thoroughly.

July

Treat the grass with the second application of fertiliser or weed killer/fertiliser.

Water when necessary and rake occasionally.

As a general rule the grass clippings should be removed each time you mow.

If weather conditions are dry and hot and the grass is weed free, leave the clippings on the lawn to help maintain ground moisture.

August

Keep mowing regularly and watering as necessary.

Fill any cracks caused by drought with a mixture of sharp sand and soil.

In dry weather conditions leave the grass longer to help retain ground moisture.

September

Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow.

October

Rake out the thatch from the turf and spike the lawn to assist in drainage.

Brush in peat and sharp sand.

November

Use a stiff broom to disperse worm casts before mowing.

Keep turf free from leaves.

December

Apart from brushing away leaves, December is a slack end of a busy year.

Keep off the lawn if it is very wet or frozen.

 

Lawn Stripes

The way to achieve a neat striped effect is for the lawn being cut in parallel stripes, alternate stripes being mown in opposite directions.

A much more important routine is to cut at right angles to the line of the previous mowing.

If the work has been carried in a north-south line, then the next cutting should be in an east-west direction.

The cross-cutting keeps down the coarse weed grasses.

To prevent grass damage do not remove more than one third of the grass height in one cut.

Guide based upon information from Hayter Ltd.